Caltrans plans roadwork through Oct. 27

By Elizabeth Larson | Oct. 21, 2022
NORTH‌‌ ‌‌COAST, ‌‌ ‌‌Calif. —‌ Caltrans‌‌ ‌‌reports‌‌ ‌‌that‌‌ ‌‌the‌‌ ‌‌following‌‌ ‌‌road‌‌ ‌‌projects‌‌ ‌‌will‌‌ ‌‌be‌‌ ‌‌taking‌‌ ‌‌place‌‌ ‌‌‌ ‌around‌‌ ‌‌the‌‌ ‌‌North‌‌ ‌‌Coast‌‌ ‌‌during‌‌ ‌‌the‌‌ ‌‌coming‌‌ ‌‌week. ‌‌ ‌‌‌ ‌
‌‌‌ ‌
Included‌‌ ‌‌are‌‌ ‌‌Mendocino‌‌ ‌‌County‌‌ ‌‌projects‌‌ ‌‌that‌‌ ‌‌may‌‌ ‌‌impact‌‌ ‌‌Lake‌‌ ‌‌County‌‌ ‌‌commuters, as well as work in Del Norte and Humboldt counties.
‌‌‌ ‌
Caltrans‌‌ ‌‌advises‌‌ ‌‌motorists‌‌ ‌‌to‌‌ ‌‌drive‌‌ ‌‌with‌‌ ‌‌caution‌‌ ‌‌when‌‌ ‌‌approaching‌‌ ‌‌work‌‌ ‌‌areas‌‌ ‌‌and‌‌ ‌‌to‌‌ ‌‌be‌‌ ‌‌‌ ‌prepared‌‌ ‌‌to‌‌ ‌‌stop‌‌ ‌‌at‌‌ ‌‌traffic‌‌ ‌‌control‌‌ ‌‌stations. ‌‌ ‌‌‌ ‌
‌‌‌ ‌
The‌‌ ‌‌Caltrans‌‌ ‌‌Traffic‌‌ ‌‌Operations‌‌ ‌‌Office‌‌ ‌‌has‌‌ ‌‌reviewed‌‌ ‌‌each‌‌ ‌‌project‌‌ ‌‌and‌‌ ‌‌determined‌‌ ‌‌that‌‌ ‌‌individual‌‌ ‌‌‌project‌‌ ‌‌delays‌‌ ‌‌are‌‌ ‌‌expected‌‌ ‌‌to‌‌ ‌‌be‌‌ ‌‌less‌‌ ‌‌than‌‌ ‌‌the‌‌ ‌‌statewide‌‌ ‌‌policy‌‌ ‌‌maximum‌‌ ‌‌of‌‌ ‌‌30‌‌ ‌‌minutes‌‌ ‌‌unless‌‌ ‌‌‌ ‌
noted‌‌ ‌‌otherwise. ‌‌ ‌‌‌ ‌‌‌ ‌

For‌‌ ‌‌updates‌‌ ‌‌to‌‌ ‌‌this‌‌ ‌‌list‌‌ ‌‌check‌‌ ‌‌QuickMap‌‌ ‌‌at‌‌ ‌‌‌www.dot.ca.gov‌‌‌ or‌‌ ‌‌1-800-GAS-ROAD‌‌ ‌‌‌ ‌(1-800-427-7623). ‌‌ ‌‌‌ ‌

LAKE‌‌ ‌‌COUNTY‌‌ ‌‌‌ ‌

Highway 29

— Road work at Route 281 will continue. One-way traffic control will be in effect from 5 p.m. to 7 a.m. weeknights. Motorists should anticipate up to 15-minute delays.

— Bridge work at Robinson Rancheria Road continues. One-way traffic control will be in effect. Motorists should anticipate up to 10-minute delays.

Highway 53

— Tree work in Clear Lake at Ogulin Canyon Road will begin on Friday, Oct. 21. One-way traffic control will be in effect from 7:30 a.m. to 4 p.m. Motorists should expect up to five-minute delays.

Highway 175

— Bridge work in Cobb from Humboldt Drive to Bottle Rock Road continues. One-way traffic control will be in effect from 7 p.m. to 11 p.m. Motorists should expect up to five-minute delays.

— Bridge work in Cobb at Estates Drive will continue. One-way traffic control will be in effect from 6 a.m. to 6 p.m. Motorists should expect up to 10-minute delays.

MENDOCINO COUNTY

Highway 20

— Road work near Road 10 continues. One-way traffic control will be in effect from 6 a.m. to 6 p.m. weekdays. Motorists should anticipate up to 10-minute delays.

— Road work will occur in Willits from the Broaddus Railroad Crossing to Cropley Lane on Friday, Oct. 21. One-way traffic control will be in effect from 6 a.m. to 5 p.m. Motorists should anticipate up to 15-minute delays.

Highway 101

— Slide removal at Pieta Creek Bridge continues. Northbound lane closures will be in effect. Motorists should anticipate up to five-minute delays.

— Bridge work at the Crawford Creek Bridge continues. One-way traffic control will be in effect from 7 p.m. to 7 a.m. weeknights. Motorists should expect up to five-minute delays.

— Bridge work near Henry Station Road continues. One-way traffic control will be in effect from 6 p.m. to 7 a.m. Motorists should expect up to 10-minute delays.

— Road work continues in Ukiah at Route 222. Lane closures will be in effect from 6:30 a.m. to 6 p.m. weekdays. Motorists should expect minor slowdowns through the area.

— Fence work in Ukiah at the East Perkins Street Overcrossing continues. Lane closures will be in effect from 6:30 a.m. to 2 p.m. weekdays. Motorists should expect minor slowdowns through the area.

— Bridge work in Ukiah from the Presswood Overhead Bridge to the Hensley Creek Undercrossing continues. Lane Closures will be in effect from 7 p.m. to 7 a.m. Motorists should expect minor slowdowns through the area.

— Road work south of Willits continues. A lane closure will be in effect from 6 a.m. to 6 p.m. weekdays. Motorists should expect minor slowdowns in the area.

— Southbound work along the Willits Bypass will occur. A lane closure will be in effect. Expect minor slowdowns.

— Utility work will occur in Laytonville from Ten Mile Creek to Steele and Davidson Lane on Sunday, Oct. 23. One-way traffic control will be in effect from 7:30 a.m. to 5 p.m. Motorists should expect up to five-minute delays through the area.

— Culvert work at Road 307 continues. One-way traffic control will be in effect and motorists should anticipate up to 15-minute delays.

Highway 162

— Bridge work at Crawford Creek continues. One-way traffic control will be in effect from 6 a.m. to 7 p.m. Motorists should expect up to 10-minute delays.

— Road work south of Dos Rios near the Rodeo Creek Bridge continues. One-way traffic control will be in effect from 3 p.m. to 7 a.m. weeknights. Motorists should expect up to 10-minute delays.

Highway 271

— Culvert work near Piercy south of Bear Pen Road to north of Exit 627 continues. Lane closures will be in effect from 6 a.m. to 6 p.m. weekdays. Motorists should expect up to five-minute delays.

DEL NORTE COUNTY

Highway 101

— Road work from the Route 101/169 Junction to Klamath Yard will occur on Monday, Oct. 24. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should anticipate 10-minute delays.

— Construction in the Last Chance Grade area will continue. One-way traffic control will be in effect. Motorists should anticipate 10-minute delays at all hours.

— Emergency work just south of Crescent City will continue. Lane closures will be in effect weeknights from 6 a.m.to 5 p.m. Motorists should anticipate minor traffic slowdowns.

— Roadway excavation from Parkway Drive to Wilson & Burtchell will continue. Lane closures will be in effect weekdays from 6 a.m. to 6 p.m. Motorists should anticipate minor traffic slowdowns. In addition, a full southbound onramp closure at the Washington Blvd. Overcrossing will be in effect weekdays from 6 a.m. to 6 p.m.

— Utility work near Dr. Fine Bridge will continue. One-way traffic control will be in effect weekdays from 8 a.m. to 5 p.m. Motorists should anticipate 10-minute delays.

Highway 199

— Culvert work between Dorris Slide and Oregon Mountain Road will continue. Lane closures will be in effect from 6 a.m. to 8 p.m. Motorists should anticipate 10-minute delays.

— Electrical work near the Collier Tunnel Rest Area will continue. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should anticipate 10-minute delays.

HUMBOLDT COUNTY

Highway 36

— Slide removal from Bar W Road to Bridgeville Road will continue. One-way traffic control will be in effect weekdays from 7 a.m. to 8 p.m. Motorists should anticipate up to 10-minute delays.

— Utility work from Butte Creek Access Road to Van Duzen River will begin on Monday, Oct. 24. One-way traffic control will be in effect weekdays from 9 a.m. to 2 p.m. Motorists should anticipate up to 10-minute delays.

Highway 101

— Bridge work south of Phillipsville will continue. Lane closures will be in effect weekdays. Motorists should anticipate minor traffic slowdowns. A northbound onramp closure will also be in effect. Motorists should use an alternate route.

— Bridge work near Myers Flat will continue. Lane closures will be in effect weekdays from 6 a.m. to 8 p.m. A full on ramp closure will be in effect. Motorists should anticipate minor traffic slowdowns.

— Excavation and concrete work from Murray Road Overcrossing to Georgia Pacific Road will continue. One-way traffic control and lane closures will be in effect weekdays from 6 a.m. to 8 p.m. Motorists should anticipate 10-minute delays. All southbound on and off ramps at the Route 299/101 Interchange will occur weekdays from 9 p.m. to 5 a.m. Motorists should follow signage and use an alternate route when necessary. Lane closures from the St. Louis Road Overcrossing to Mad River Bridge will be in effect from 8 p.m. to 6 a.m. Motorists should anticipate 10-minute delays.

Highway 254

— Utility work will occur from Franklin Lane Grove to the Miranda Bridge on Tuesday, Oct. 25. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect 5-minute delays.

Highway 255

— Permitted utility work between Jackson Ranch Road and “V” Street will continue. One-way traffic control and lane closures will be in effect from 7:30 a.m. to 6:30 p.m. weekdays. Motorists should anticipate 10-minute delays.

Highway 299

— Falsework installation from Route 200 to Route 101 will continue overnight. One-way traffic control will be in effect from 8 p.m. to 6 a.m. Motorists should anticipate 10-minute delays.

— Full nighttime closures north of Arcata will be in effect from 8 p.m. Friday, Oct. 21, to 6 a.m. Saturday, Oct. 22, or from 8 p.m. Saturday, Oct. 22, to 6 a.m. Sunday, Oct. 23. Travelers will use Route 200 as a detour during the closure.

— Landscape work from Chezem Road to a half mile east of Circle point continues. One-way traffic control will be in effect weekdays from 7 a.m.to 5 p.m. Motorists should anticipate five-minute delays.

— Shoulder work from Old Three Creek Road to Vista point will continue. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should anticipate five-minute delays.

— Construction from Willow Creek to Old Three Creek Road will continue. One-way traffic control will be in effect from 7 a.m. to 3:30 p.m. Motorists should anticipate 10-minute delays.